|
Customers will benefit from all enhancements, including new features, new diagnostics, and many times, improved machine performance. For more information, please contact the Sales Department at (715)339-2191 or send an email to upgrade-sales@marquipwardunited.com.
The following upgrades are available for the Dual Rotary Shear:
Automatic Dry Spot Divert
7991148- Corrugator stop for any reason will start a timer which is settable in the PLC. If set time is exceeded before the Double Backer starts motion, the segment of board between the glue applicator roll and the hot plate section at time of stop will be automatically diverted at the Shear.
Cut Counter
7990813 - Counter to record number of shear chops.
Hot Plate Scrap Divert
7991527 - Corrugator stop for any reason will start a timer which is settable in the PLC or OIC. If set time is exceeded before the Double Backer starts motion, all board that had been in the hot plates while stopped will be automatically diverted at the Shear.
Infeed Web Support Pan
7990820 - Hardware to provide support across complete web width.
Operator Training Video
7990536 - Consists of two video tapes and a workbook designed to give new operators the fundamental training needed to perform safe operating techniques for the MarquipWardUnited Rotary Shear.
Remote Dry Spot Divert
7991147 - Wet end operator push-button selection of length of web to be diverted. When beginning of material to be diverted passes a user-defined reference point on wet end, operator presses button. When good material again reaches reference point, operator presses the button again. This segment of material is tracked through the Double Backer and diverted at the Shear.
Surge Suppressor
7993126 - Surge suppressor filters incoming power to protect machine components from electrical spikes and surges caused by lightning and power-up of other equipment on the same distribution line.
NOTE: Does not include any additional hardware that may be required.
NOTE: Field Service installation assistance is recommended and is not included in software update price. It may be possible to install the software update via modem, in some cases, dependent upon hardware and software configuration.
Back to Top of Page
|